|
|
|
Chapter 1. 離岸結構介紹
1.1. 離岸結構簡介(Introduction to offshore structures)
1.2. 離岸結構發展的歷史(History of offshore structures)
1.3. 典型的離岸結構類型(Types of offshore structures)
1.4. 離岸結構的構件(Components of offshore structure)
1.5. 離岸結構事故(Accident of offshore structure)
Chapter 2. 離岸結構設計概述
2.1. 離岸結構設計概述(Introduction to offshore structural design)
2.2. 海上結構的設計載荷(Design loads for offshore structure)
2.3. 重力載荷(Gravity loads)
2.4. 環境載荷(Environmental loads)
2.5. 載荷組合(Load combinations)
2.6. 抗衝擊結構框架(Impact resistant structures frames)
2.7. 全域載荷(Global load)
2.8. 設計參數和假設(Design parameters and assumptions)
2.9. 模擬(Simulation)
Chapter 3. 離岸結構規範
3.1. 標準與規範(Standard and rules)
3.2. ISO國際標準
3.3. EN歐盟標準
3.4. DNV
3.5. NORSOK
3.6. 離岸鋼結構製造參考之規範(Offshore industry standards)
Chapter 4. 海洋環境的腐蝕
4.1. 海洋環境腐蝕概述(Marine corrosion)
4.2. 金屬的腐蝕(Corrosion of metal)
4.3. 腐蝕的形式(Forms of corrosion)
Chapter 5. 結構金屬材料
5.1. 海洋環境用鋼結構(Steel structures for the marine environment)
5.2. 製造相關的鋼材特性(Steel material properties required for fabrication)
5.3. 鋼種等級及生產方式(Steel grades and process route)
5.4. 延脆轉移溫度(Ductile-brittle transition temperature)
5.5. 碳當量(Carbon equivalent values)
5.6. 裂紋頂端開口位移(Crack tip opening displacement, CTOD)
5.7. 應變時效(Strain age)
5.8. 鋼板交貨公差要求(Delivery tolerance requirements of steel plates)
Chapter 6. 離岸結構的銲接
6.1. 銲接製程(Welding processes)
6.2. 離岸結構常用銲接製程(Typical welding processes used in the offshore structure)
6.3. 銲接用鋼材群組分類(Material group classification of steels for weldings)
6.4. 銲接耗材(Welding consumables)
6.5. 銲接姿勢(Welding position)
6.6. 離岸結構中的常用接頭(Typical welded joints in offshore structure)
6.7. 銲接熔填量計算(Weld consumable calculation)
6.8. 熱影響區(Heat affected zone)
6.9. 熱影響區的開裂(Cracking in the heat affected zone)
6.10. 影響銲道性能的參數(Parameters affecting weld metal performance)
6.11. 殘餘應力(Residual stresses)
6.12. 銲接接頭的疲勞(Fatigue of welded joints)
6.13. 銲後熱處理(Post weld heat treatment)
6.14. 改善銲道疲勞的技術(Fatigue improvement techniques for welds)
6.15. 銲接程序(Welding procedure)
6.16. 常見的銲接缺陷(Common welding defects)
6.17. 銲道接受標準等級(Welds acceptance criteria)
Chapter 7. 離岸結構防蝕保護
7.1. 防蝕保護(Corrosion protection)
7.2. 塗裝(Coating)
7.3. 熱浸鍍鋅(Hot dip galvanizing)
7.4. 陰極保護(Cathodic protection)
Chapter 8. 建造離岸結構
8.1. 製造和建造簡介(Introduction to offshore structures fabrication and erection)
8.2. 製造方法說明書(Fabrication method statement)
8.3. 品質管理系統(Quality management system)
8.4. 維度控制(Dimensional control)
8.5. 製造公差要求(Fabrication tolerance requirements of offshore structure)
8.6. 組件的製造(Fabrication of the component)
8.7. 離岸結構建造(Offore structure erection methodology)
8.8. 物料、採購和儲放(Material, procurement, logistics and storage)
Chapter 9. 管理及規劃
9.1. 專案管理基礎(Fundamentals of project management)
9.2. 製造商資格認證(Manufacturer qualification certification)
9.3. 專案管理計畫書(Project management plan)
9.4. 生產規劃和管制(Production planning and control of the offshore structure)
9.5. 供應鏈管理基礎(Fundamentals of Supply chain management)
9.6. 技術人員訓練及認證(Training and certification)
9.7. 廠址及工廠布置規劃(Site plot and plant layout plan)
附錄1 DNV Maritime規範
附錄2 DNV Oil and Gas規範
附錄3 DNV Energy規範
附錄4 NORSOK規範索引
